home *** CD-ROM | disk | FTP | other *** search
/ Cream of the Crop 3 / Cream of the Crop 3.iso / comm / aprs403b.zip / README.NOW < prev    next >
Text File  |  1994-03-30  |  3KB  |  53 lines

  1. README.NOW
  2.  
  3. APRS consists of the .EXE file and dozens of MAP, HISTORY and README files,
  4. normally all ZIPPED up with DIRECTORIES into a single APRSnnn.ZIP file.
  5. To facilitate downloading of updates (and these have been frequent in the
  6. past!), this internet version consists of two files - APRSnnnl.ZIP and
  7. APRSnnnX.zip.  For a complete package you need both files.  If you already
  8. have the nnn version, you only need the latest APRSnnnl.ZIP to update your
  9. package (APRS403B.ZIP as this is written).
  10.  
  11. NOTE! YOU MUST USE THE LATEST VERSION (1993) OF PKUNZIP.  AND YOU MUST USE IT
  12. WITH THE -d OPTION TO GET THE SUBDIRECTORIES!
  13.  
  14. Despite the 2.3 Mbyte size of the whole APRS system, (mostly maps), a minimum
  15. system can be built in 280K with only the .EXE, MAPLIST.APR, and one .MAP file.
  16. That is what you wiil find in APRSnnnl.ZIP, plus this file and any new or
  17. replacement files not in APRSnnnX.zip.
  18.  
  19. I am also not trying to keep track of all small maps in every state.  There
  20. should be an APRS MAP COORDINATOR for your state.  Find him...
  21.  
  22. APRS will run on any PC, XT or AT machine with CGA,EGA, or VGA.  If you have a
  23. Hercules Video card, run SIMCGA P first to make it simulate a real CGA device.
  24. This works, but poorly.  It only costs $16 to buy a better VIDEO card!
  25.  
  26. TO INSTALL APRS on your SYSTEM:               DOS COMMAND
  27. --------------------------------------------  --------------------------------
  28. 1.  Create APRS directory on your Harddrive-  MD APRS
  29. 2.  Change Directory into that directory   -  CD APRS
  30. 3.  Put APRS disk into B and unzip:        -  PKUNZIP -d  B:APRSnnn.ZIP  c:
  31. 4.  Execute APRSnnn                        -  APRSnnn
  32.     a. Give your call and other info as prompted.
  33.     b. Move cursor to your exact QTH using arrow keys and PgDn (shft-PgDN)
  34.     c. Hit INSert key and answer QTH questions
  35.     *. Alternatively to b & c, use ^F to enter your Lat/Lon directly
  36.     d. Use V command to enter your validation number
  37.     e. Use ctrl-V to set your VIA Digipeater path (needs TNC to be connected)
  38.     f. Move and center map to your area of interest and preferred range scale
  39.     g. Save a config file using alt-C  (repeat steps e - g at anytime)
  40.     h. Have fun! READ all the README.xxx files!
  41.     i. Use the ctrl-T TALK mode to talk to ur TNC.
  42.     j. If you have some AEA or KANTRONICS simplified TNC's, you may need to
  43.        set EXPert ON in order for the TNC to repsond to all APRS commands
  44.  
  45. You should be prepared to modify the MAPLIST.APR file to select those
  46. maps of interest to you.  Remember that APRS can only support 140 active maps.
  47. So remove the * in front of the maps you want to activate, and insert * in
  48. front of those you do not need.
  49.  
  50. THE LATEST APRS is posted on 410-280-2503 BBS.  I will also usually post a
  51. file similar to: 402to403.zip which will contain only the files that changed
  52. in the lastest release.
  53.